Equipment Overview
This machine is suitable for UV photosensitive coating, ink,
adhesive coating, and then, injection or a variety of materials in
the printing surface in an instant curing and drying.
1. Printing: widely used in screen printing, lithography,
letterpress printing, self-adhesive trademark, metal nameplate, PC,
PVC, ABS, PS, acrylic, Trinidad and Tobago, glass, ceramics,
electronic components, single-sided circuit board Wait .
2. Painting areas: bright wood surface coating, paper polishing,
plastic tiles, PU leather coating, optical fiber surface coating.
3. Followed by: Circuit board CHIP parts Then, a variety of
electronic components, glass and then, liquid crystal film, the
terminal sealant then.
4. Note type: Decorative plate dishware, decorative wear (buttons,
brooches, hair clips, belt buckles, etc.)
Main Features
1. Instant dry, high production efficiency.
2. After drying can make the printed surface to achieve high
hardness, high gloss, abrasion-resistant, solvent-resistant effect.
3. Transmission using roller transmission, variable frequency
stepless speed regulation.
4. Belt anti-offset, to ensure smooth delivery.
5. Selection of high quality and efficient lamp, lamp room forced
exhaust heat to extend lamp life, protection of dry goods will not
be deformed by heat.
6. The whole surface of the box spray treatment, nice,
corrosion-resistant.
The machine has the advantages of novel modeling, reasonable
structure, large working area, full function, simple operation,
convenient maintenance, low noise, high reliability, low cost, low
energy consumption and high production efficiency.
Instruction
1. Turn on the power, open the control door, close the power, air
switch.
2. The total power switch screwed to a stalls, unscrew the
temperature control switch, transport switch, open the switch on
the governor, the transport speed of the conveyor belt is adjusted
to meet the requirements.
3. Press the light 1 open button, UV light 1 light, there are
instructions on the ammeter; then press the light 2 open button,
light 2 light, electricity Flow Table 2 has instructions.
4. The thermometer indicates the temperature began to work, when
the temperature rises to 40 ~ 50 ℃, immediately turn off the fan
switch fan, otherwise it will shorten the life of the lamp. If the
temperature exceeds the required temperature of the product, turn
off the UV lamp so that the fan to reduce the temperature, so as to
avoid unnecessary loss of the product.
Packaging and Delivery
1. Aluminium box and carton box, careful and tight package, make
sure the package is intact.
2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China
post/EF-Express/Special line, as you have chose in the order.
3. The shipping time is different, it depends on the distance
bewteen us. At usual, exclude the preparing time, the goods would
be sent to you in 10days
